There are four ways to install
the TMP Impact Recovery System Flexible Bollards:
(For fitting information for the other products in our range please contact us)
1) Fixed Base Plate (Code 100000 and 10007)
Drill four holes into the
tarmac or concrete surface and use the fixing bolts to secure the
Fixed Base to the ground. Then fit the TMP Bollard into the base
using the Allen screws. We can supply you with the bolts.
2) Portable Base (Code 100003)
This can be used for
temporary bollard usage. The Bollard will click into the base or can
be fixed on a more permanent basis if required.
3) Cast In Cage (Code 100006)
This should be used when
you are building a new traffic island. It is placed in the ground
and then secured by concrete or tarmac. The Fixed Base Plate is then
secured to the Cage. This method gives a more secure fixing.
Tech Drawing
1 Tech Drawing 2
4) Converter Plate (Code 100161 and 100162)
You should use this when you
are converting your existing lit bollard to a TMP Flexible Bollard.
The plate will fit over the lit bollard ground base and to it you
connect the TMP Bollard. We have a number of different plates to fit
different lit bollard designs.
|
